Serious security for roller shutter doors - At last! The Lock 'n' Roller solves a common problem with thieves opening roller shutter doors on commercial buildings and using them to remove goods in bulk. The Lock 'n' Roller helps you to keep the thieves out!

Easily fitted to the majority of roller shutter doors, each double-sided Lock 'n' Roller kit includes two locking plates and two high security Squire locks so that the bottom corners of the door can be secured to the floor. The thief can see from outside the building that there is some serious security fitted to the door, so he knows it's no longer an easy target.

The photo shows the left-side only single-sided fitting kit. The double-sided kit is strongly recommended.

A double-sided kit includes two locks that are keyed-alike, meaning that they are both operated with the same key. A double-sided kit also includes a left- and a right-sided locking plate - these are mirror images of each other.

All Lock 'n' Roller kits include all fixings required and a straight-shank 14mm masonry drill bit (an SDS-Plus drill bit is available as an option).

There is a lot more information on suitability etc on the Lock 'n' Roller information page.

The Garage Defender Master is easier to use than the original Garage Defender design and we are offering it at a bargain price!

Secured by 2 high tensile bolts and locked in place with an anti-tamper solid-style lock, this product resists forcing of up-and-over doors - a common type of attack. Stop the thieves getting inside your garage!

Note: Drill bits NOT included.

See Details page for more info.

This item is sometimes shipped direct from the factory and an extra delay (e.g. 1-2 days) can be incurred as a result.

Available for shipping within the UK only.

As featured in "Bike" magazine (December 2006, "Don't be a victim" p158) and "Ride" magazine (January 2007, p76).
Supplied as a pair, these keyed-alike locks can be operated from either inside or outside the garage door.
Ideal for up-and-over garage doors or sectional doors of either metal or wood construction, up to 38mm in thickness.
Can be fitted to either side of the door, usually horizontally but vertical fitting is also possible if the door has a suitable surface.
3 keys provided (special 4-sided keys).
Hardened bolts shoot 70mm into door frame or floor.
Easy DIY Fit - See Details page for more info. 1.4kg

Note: Drill bits NOT included.

Squire heavy-weight hasp & staple, suitable for use with SS50CS/SS50CP5 padlocks. Ideal for securing a shed door. The photo includes a 50p piece to give an idea of scale. 0.7kg

Strongly Recommended: Buy a Beef-Up Kit to boost the security of your shed at minimal cost. Please click here for more detail.

Beef-Up your shed door security with this kit of nuts & bolts, drill bit and instructions!

So many times we have people asking for a good lock to put on their hasp & staple, but they have not realised that the hasp & staple itself is not properly secured to the shed! There is even more of a problem with the hinges on the other side of the door. A thief will commonly ignore a good padlock if he only needs to use a crowbar or screwdriver to simply prise out the wood screws that are invariably used on these fittings! The lock and the hasp & staple may be good quality and properly bolted on one side of the door, but if the hinges can be easily pulled away from their wood screw fixings, even with the spade you left leaning against the shed, your property is left vulnerable. Improve your shed security at minimal cost by using the relevant parts and the guidance provided in the Beef-Up Kit!

DIY fit. Drill, spanners, etc required. Drill bit included.